A lot of childhood days out with my Dad had class 56s in them. We used to go to Doncaster and Barnetby in the mid-nineties (trips across the Pennines were a couple of years away!) and the scream of their turbo chargers as they accelerated. Considering how much of a part of the railway they were, it seems odd how they no longer an everyday sight. Around this time, I can remember the class 56 my Dad came home with (over twenty years ago!) from the local model shop; a Dapol model, repainted by its previous owner in Railfreight Construction livery. While the repaint might not stand up today, it had a real impact with the ten year old me. The triple grey colours were exactly what I was seeing when we went out watching trains.
|Class 56, no. 56067, passing through Barnetby around 1993 I think. Taken on a Fuji 35mm 'point and shoot' camera with a very short preset lens in fading light. Not great quality but as it was a ten year me who took it, it seems very appropriate here.|
I'm not exactly old at thirty one, but I am now modelling the railways “of my youth”. With that I do sound old... West Halton is is firmly set in the early nineties – it'll always be summer and the my nine year old self would have been oblivious to the issues the line and its staff would be suffering. The railways were not in the best shape then after years of under investment; the branch to West Halton, and the steelworks it served, would struggle to last a few more years. While West Halton Sidings is, of course, fictitious this story was true of a good number of freight only lines. During these times, the clean and bright appearance of many of the 'triple grey' locos really made them stand out.
Whilst I may have over romanticised this a bit, although they looked clean, the railway's always been a filthy place! But it does lead me neatly to the latest loco to join the West Halton fleet, an early British built class 56 from Hornby. As R3052 comes, it's in Trainload Construction livery which upon opening the box did stir memories of the original 56 which my Dad brought home. The colours look pretty good to me, though they are towards the darker end of things compared with those similarly liveried models from Bachmann or Lima, or those sprayed using either Railmatch or Precision paints, but it's still quite acceptable. Certainly I daylight it does look 'right'. The livery was quite prone to fading so variations in colours is not a problem. The print is excellent, the data panel is very, very sharp; OLE warning markings are similarly reproduced.
Beyond the colours, the loco itself is good too. It's not the first of the 'new' class 56s I've had from Hornby, I've got sitting on a shelf one of the original releases in EWS livery with the revised cantrail grilles. Worryingly the post about it is over seven years old now! When I changed eras, the later style loco (thanks to the correctly revised grilles) just wasn't suitable for the early nineties. I really should do something with it... But it does make an interesting comparison with the earlier style of loco. The difference between the cabs on the Rumanian and early British machine when compared with the later locos is significant yet very subtle. On the older Dapol model you could make this change by carefully 'rounding off' the moulding. The early cabs were of aluminium and did have a 'softer' look than the later steel fabricated cabs. Capturing this is difficult, even when you take care – Hornby have captured the face of the loco well I think. The multiple working equipment is quite reasonable and is a key feature of the 'face' of the loco – the model features revised high intensity headlamps which certain locos acquired over time, more so towards the end of their working lives. Although the moulding is pretty nice, it doesn't make it a little more awkward to renumber the loco to match other class members – a bit of work and the original style can, I hope, be retro fitted. As with Hornby's other current generation diesel models, the cab interiors are superbly modelled. The glazing is slightly prismatic but clear enough to allow a good glimpse at the detail within. You feel you should be able to see the driver's snap and copy of that day's paper.
|The standard of tooling on the roof is excellent - there's a real delicacy to it which really places the model towards the top end of things.|
Moving away from the cabs the loco is very pleasing. The cantrail grilles are very delicately reproduced, as it much of the roof detail. The fan grilles, however, are just as I originally found and are a bit disappointing. The thickness of the body moulding is all too obvious – some years ago Hornby did much better with their class 50. However, Shawplan's 'Extreme' etchings come to the rescue here. They also help with the covers for the jacking points, which Hornby have oddly missed. However, a couple of minor easily sorted details don't really detract too much. The roof, fan grilles aside, is very good indeed it has the delicacy which we used to associate with Lima's tool makers. Although we tend to look at the real thing from ground level, we view most models from above. Even with a high baseboard/tack level, we still look down slightly, so this area is very important. Fifteen years ago most of us began by detailing diesels by fitting new roof fan grilles to help matters on older models!
The real strength of this model lies a little lower than the roof...
The underframe has some superb details which really is at the top end of RTR models – even seven years after the model's introduction it still stands up. Much like Hornby's class class 60, the fuel tank area is awash with separately applied details which are a world away from what went before. I spent hours rebuilding the underframe on my class 25 but the standard here is probably better than that! Is this depressing? Well, probably not but it's a good indication of the standard here! The bogies are nice too – photos don't really do them justice in their naked plastic state. The separate pipework for the brake actuators is a very satisfying touch and the cab steps are nicely rendered too. The bufferbeam suffers slighty as the chassis casting is to suit all three variations of the type, so there's room for added detail beneath the one part of the buffer beam fairing which the early British built machines had – only the Rumanian built locos and 56031/2 had the full class 47 style fairing. The side detail cast into the chassis makes up for this and, being honest, from 'normal viewing angles' it's not really a problem – that and most people aren't as awkward as I am! Buffers are not perfect – they look a little underfed to me. Modified Hornby class 50 buffers would probably be worthwhile.
Running, naturally, doesn't disappoint – all wheel drive and pick up is pretty much par for the course these and the fifty-six is a very classy mover. Still not sure that the rubber band between the flywheel and drive shaft for the fans helps things – a pair of side cutters can sort this though! Axles are 2mm which makes rewheeling easy for those of us who want to run the model in EM or P4 – only the brake gear will need modification to allow this. The lighting is not to my taste – white LEDs don't really suit the diesels of this age and era. In daylight the marker lights can barely seen on older types, but white LEDs don't really help us replicate this – tinting them with paint may help. We'll see...
|The overall appearance is very good - the delicacy of the body and finesse of the underframe really do make the model.|
Looking back I do wonder if I have appeared rather critical of the model - and I think I was probably overly critical of the original model I described back in 2007. I think it is more a reflection of the standard which we have come to expect of RTR models from the likes of Hornby. I'm also coming from the point of view of someone who likes to take out of the box models and improve them – I want to to not be, in this case, a Hornby class 56, but my model of a class 56. Small difference but quite significant. However, to make it a worthwhile proposition the starting point needs to be good in the first place. Hornby's class 56 is a pretty good starting point. For most modellers, as it comes it is very acceptable; despite the list of of extras and new parts I have in mind the model could easily be at home hauling a long rake of HAA hoppers and really look the part. As a 'layout loco' it works perfectly. And a base for a full on finescale conversion, it's a very good place to start!
|Metals sector 56044 "Cardiff Canton" at Hasland with a short train of bogie bolster steel carriers - September 1992. Photo reproduced by kind permission of John Turner.|
So I'm very happy with West Halton's new addition – it's stirred childhood memories and will form a great basis for 56044! One of Cardiff Canton's finest and was regularly seen in Lincolnshire and Yorkshire on flows from South Wales.